Megohmmeter

Connecting your Insulation Test Set

DC Hipots and Megohmmeters are fairly common test sets used by test technicians and engineers.  The basic operation for both a DC Hipot and a Megohmmeter is the same; a known DC voltage is applied across insulation.  The applied potential causes several small currents through and over surfaces of the insulation being tested. The total current is measured and the result is displayed as either an ohmic value or as a current value.


Contact Us Now

The Basics of Dielectric Absorption Test

Megger 210415 15kV Analog MegohmmeterThe dielectric absorption ratio is the ratio of two time-resistance readings such as a 60-second reading divided by a 30-second reading.  If the ratio is a 10-minute reading divided by a 1-minute reading, the value is called the polarization index. The principle behind the test is that the resistance would increase with time as the capacitive and polarizing currents begin to subside.

Unlike spot tests that are relative to specific conditions such as temperature each time that the test is performed, ratios of insulation resistance (Dielectric Absorption Ratio) that are taken at essentially the same time and temperature require no correction factor for comparison purposes.

Renting the Megger 210415 Analog Megohmmeter is an Economical Option

Megger 210415 15kV Analog MegohmmeterThe Megger 210415 15kV Analog Megohmmeter is a high voltage Megohmmeter suitable for dielectric absorption and step-voltage testing.

The 210415 provides direct reading measurements up to 100,000 MΩ at 5 kV and up to 200,000 MΩ at 10 kV, with a multiplying factor for all other voltages up to 15 kV.

Renting the Megger 210415 15kV Analog Megohmmeter Saves Time and Money

Megger 210415 15kV Analog MegohmmeterWhen it comes to measuring resistance on insulation testing on cable insulations and insulation of other electrical devices, renting the Megger 210415 15kV Analog Megohmmeter is a great way to save time and money.

The Megger 210415 is a high voltage Megohmmeter, with a variable output voltage of up to 15 Kilo Volts, and can measure insulation resistances of up to 100,000 Megohms. The test set is capable of conducting dielectric absorption and step voltage tests which makes it ideal in detecting bad insulation spots and bad layers in multi-layered insulators. 

Rent Megger MIT400 Series Insulation and Continuity Testers from Protec

Protec Equipment Resources is proud to announce the addition of Megger MIT400 series of insulation and continuity testers to our inventory of electrical test equipment. These instruments offer those working in electrical engineering, the electrical supply industry and in maintenance, repair and servicing of industrial equipment and manufacturing processes a convenient and reliable tester.