Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

End-to-End Testing Made Easy with the Doble F6150 Relay Testing System

by Protec Tech Team October 06, 2014

With the Doble F6150 Relay Testing System, end-to-end satellite syn­chronized testing is very simple and easy. There’s no elaborate test set up, and all the required software is in the F6150 instrument. Only a GPS antenna with an access to open sky is required. If access to the sky is not possible, use of the optional F6050 high precision time synchronizer unit which simulates a GPS signal. So no matter the location, state-of-the-art end-to-end tests can be performed.

READ MORE >>

Doble F6150 For All Your Relay Testing Needs

by Protec Tech Team July 30, 2014

If you need a solution for relays and protection schemes, you want testing equipment that offers high power, flexibility and advanced technology to perform testing with ease.

READ MORE >>

Doble F6150, a Complete Solution for Problems Related to Protection Relays and Schemes

by Protec Tech Team May 05, 2014

Full simulation tests can be run on protection schemes and relays very efficiently with the help of a Doble F6150 Relay Testing System.

READ MORE >>

Keep Relays Working Properly With the Doble F6150 Relay Testing System

by Protec Tech Team January 27, 2014

Relays should be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices. Relay test sets are equipment used in testing relays by applying sufficient current to simulate specific conditions, assuring that the relay is operating correctly.

READ MORE >>

Assure Proper Working Condition of Protective Relays with the Doble F6150

by Protec Tech Team January 02, 2014

A protective relay is designed to calculate operating conditions on an electrical circuit and trip circuit breakers when a fault is detected. Relays should always be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices.

READ MORE >>

Comprehensive Protection Scheme Testing with the Doble F6150

by Protec Tech Team December 18, 2013

Testing protection schemes requires special electrical test equipment offering high power, sophisticated software and flexibility. The Doble F6150 fits these specifications perfectly.  With a wide range of ground and earth relay faults along with microprocessor protection schemes, the Doble F6150 allows you to run comprehensive tests using just one test unit, alleviating the need to carry multiple tools in the field.

READ MORE >>

Highly Versatile Relay Testing With the Omicron CMC 356

by Protec Tech Team December 16, 2013

Relays are frequently found in high voltage or medium voltage power systems. With usage the relay connections deteriorate or get contaminated. Therefore, it’s in the interest of both the end user as well as the manufacturer to check the behavior of relays periodically.

Omicron CMC 356 Universal Relay Test Set and Commissioning ToolThe Omicron CMC 356 Universal Relay Test Set and Commissioning Tool’s analog test signals are generated digitally using DSP technology. This, in combination with the use of additional error correction algorithms, results in accurate testing signals even at small amplitudes.

READ MORE >>

Test with the Doble F6150 to Verify Proper Operation of Relays

by Protec Tech Team November 13, 2013

Offering extremely versatile relay testing equipment used to test all manners of relays and protection schemes, Doble is a trusted name in the electrical diagnostic testing industry.

READ MORE >>

Relay Testing Made Easy with the Doble F6150

by Protec Tech Team November 03, 2013

Doble F6150 Relay Testing SystemRelay simulation tests that are tough to perform with the help of other devices can easily be done with the help of the Doble 6150. This is why many professionals carry the Doble 6150 whenever they go anywhere to test electrical units.

READ MORE >>

Test Ground Over-Current Relays Correctly with the Doble F6150

by Protec Tech Team October 22, 2013

Doble F6150 Relay Testing SystemDoble provides several options for expanding the F6150 so it can be configured to fit your needs exactly.

READ MORE >>

Doble F6150, the Ultimate Tool for Protection Scheme Testing

by Protec Tech Team October 08, 2013

The Doble F6150 is a versatile, all-in-one solution for testing protection relays and schemes. Designed to meet your needs, the Doble F6150  is capable of performing the most simple through the most complex tests. Whether you need to test an individual component or test an entire scheme, the Doble F6150 is the proven solution to assess protection system performance for analog testing of 1A and 5A protection devices.

READ MORE >>

Only Testing Relays is Not Enough

by Protec Tech Team October 08, 2013

The relay scheme is one of the most critical components for the effective operation of your power grid, and relay testing is required to prove that a relay meets the published specification and complies with all relevant standards. Since the principal function of a protection relay is to operate correctly under abnormal power conditions, it is essential that the performance be evaluated under such conditions. Yet most test equipment does not actually test the protection scheme, they only test the individual relays, and testing individual relays in a protection scheme does not guarantee the proper functioning of the complete scheme.

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider