Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

Amprobe DM-III 1000 Detects and Records Power Quality Events

by Protec Tech Team September 21, 2015

Power quality problems can cause severe deterioration of equipment, energy losses and instability of the electrical system.  It is important to correct poor power quality to ensure continuous and reliable operation of the electrical facility and to prolong the operating life of equipment. 

READ MORE >>

Fluke 1750 is All You Need in a Three Phase Power Quality Recorder

by Protec Tech Team August 31, 2015

The distortion in the power line can be complex and can be difficult to measure using ordinary tools like an oscilloscope.

READ MORE >>

Rent the Dranetz HDPQ Xplorer Power Quality Analyzer from Protec Today

by Protec Tech Team August 10, 2015

The Dranetz HDPQ Xplorer Power Quality Analyzer is a top of the line PQ monitoring system, and offers high speed transient capture capabilities, so you’ll never miss an event. 

The Dranetz HDPQ Xplorer Power Quality Analyzer offers the best in class monitoring capabilities available. It measures to all current industry standards, including IEC 61000-4-30 Class A, IEC 61000-4-7, IEEE 1159, IEEE 519, IEEE 1459, and more.

READ MORE >>

Assess Power Quality with the Fluke 1735 and Fluke 1750

by Protec Tech Team September 18, 2014

Power quality tools, such as power analyzers, are used to measure power quality. It is an indicator of how efficiently a system can support the reliable working of its loads. A power event or disturbance may involve frequency, current or voltage. These power disturbances can occur in consumer loads, consumer power systems, or in the utility department.

Fluke understands what is needed to properly assess power quality, and offers the tools through which power disturbances can be measured, increasing the efficiency of utilities.

READ MORE >>

Rent the Fluke 1750 and 1735 Power Quality Testers from Protec Today

by Protec Tech Team August 06, 2014

Though there are many testing devices available in the market, a power quality tester is essential electrical test equipment for the reliable operation of the power-supplying electrical system. In present times, the electrical equipment testing market is flooded with a broad range of power-quality analyzers. But choosing the right one is very essential in order to get the device that meets your specific needs.

Fluke offers the most cost-effective and widely-recognized power quality testers.  With innovative technology, their power quality testers have the ability to monitor all power disturbances.

READ MORE >>

A Brief Snapshot of Electrical Test Equipment for Power Analysis

by Protec Tech Team November 29, 2012

Megger DET24C Ground Resistance TesterThe smooth working of any electrical system depends on periodic analysis and testing of various electric power applications. Megger is the leading supplier of electrical test equipment which is durable, reliable, and accurate. It is important to test various parameters of electric power, so that any fault in the electrical devices can be promptly detected and resolved. The malfunction of the equipment can culminate in heavy monetary loss.

READ MORE >>

How to Upgrade Dranetz PX5

by Protec Tech Team September 25, 2012

You might have your own Dranetz PX5 Power Quality Analyzer, or you might have electrical test equipment rental- upgrading the unit is an easy process and it offers many benefits. Here are some steps that you can follow:

READ MORE >>

Measure Power Quality Events Accurately with the Amprobe DM-III Power Quality Analyzer

by Protec Tech Team August 09, 2012

Amprobe DM-IIIWhen power quality deteriorates, your electrical system and equipment is at risk of premature failure. Bad power quality also causes electromagnetic interference to be radiated throughout the facility. This means sensitive equipment like computers and hospital machines may operate erratically or lock up. This can cause serious problems and interruption of service. Technicians often evaluate the power quality of an electrical system to ensure maximum efficiency and to prolong the operating life of equipment.

READ MORE >>

Accurately Measure THD and TID in the Electrical Line with the Dranetz PX5

by Protec Tech Team April 11, 2012

Dranetz PX5An electrical system that has a lot of distortion, voltage spikes and harmonics can cause serious problems. These electrical interference can cause motors to overheat or lose spinning synchronization, accelerate the breakdown of transformers and cause an increase in power losses. These problems can cause a lot of headache and cost you a lot of money. 

READ MORE >>

The Testing Capabilities of the Doble M4000 12kV Power Factor Tester

by Protec Tech Team April 05, 2012

Doble-M4000.jpgWhen it comes to insulation reliability testing, the Doble M4000 M4100 Power Factor Insulation Analyzer is the industry standard. With its various test options, accuracy and options to extend its testing capabilities, this tester has become a favorite of many. The Doble M4100 allows you to test for Tan Delta, Power Factor, Excitation Current and Capacitance. You can also use the M4000 to test oil resistance by using an oil test cell.

READ MORE >>

Reduce Electrical Insulation Problems with the M4000 Doble Power Factor Tester

by Protec Tech Team September 30, 2011

Doble-M4000.jpgPower factor measurement is an effective testing method for determining the reliability of insulators. This test helps reduce faulty electrical components from being commissioned. Bad parts can cause severe damage to your electrical system. This results to added expenses for labor costs on repairs and equipment replacements.

READ MORE >>

The Interference Resistant Doble M4000 Power Factor Test

by Protec Tech Team August 08, 2011

Doble-M4000.jpgBad insulation not only causes expensive repairs but also wasted time. You can prevent the hassles of poor insulation with regular maintenance checks. This allows you to spot the problem early and address the issue before it gets out of hand.

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider