Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

Omicron CMC 356 for Primary Injection Testing of CTs, VTs or Relays

by Protec Tech Team November 16, 2015

For primary injection testing of current transformers, VTs or differing types of relays, the Omicron CMC 356 Universal Relay Test Set and Commissioning Tool is the high powered, versatile solution.

READ MORE >>

Omicron Recloser Control Cable Packages Available for Rent from Protec

by Protec Tech Team September 23, 2015

Protec offers a comprehensive range of Omicron cable packages as an accessory to the  Omicron CMC 356 Universal Relay Test Set and Commissioning Tool for testing various recloser and sectionalizer controls.
READ MORE >>

Measure the Burden on CTs and VTs with the Omicron CPC 100 Test System

by Protec Tech Team September 21, 2015

The Omicron CPC 100 Multi-functional Primary Test System allows the verification of the ratio and polarity of CTs and VTs – preventing wrong connections, especially in the case of tapped CTs. Injecting current or voltage into individual CTs / VTs and checking the reading at the relay ensures that phases are not mixed up and that the CT and VT ratio setting in the relay is correct.

READ MORE >>

Perform Electrical Tests on Various Assets with the Omicron CPC 100

by Protec Tech Team August 21, 2015

With the Omicron CPC 100 Multi-functional Primary Test System electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit breakers can be performed.

The Omicron CPC 100 Multi-functional Primary Test System is the base for multiple accessories. These facilitate further applications, such as tan delta measurements, as well as line and ground impedance measurements.

READ MORE >>

For Testing High-Burden Electromechanical Relays - Omicron CMC 356

by Protec Tech Team May 12, 2015

Relay test sets are used for all critical operational areas including transmission, distribution and generation. The test simulates different fault conditions and monitors the performance of the protective device under test. In addition to protective relays, relay test sets can be applied to small molded-case circuit breakers and motor overload relays.

READ MORE >>

Testing with Variable Frequency - Omicron CPC 100 Primary Test System

by Protec Tech Team May 11, 2015

The powerful Omicron CPC 100 Multi-functional Primary Test System provides up to 800 A or 2 kV with up to 5 kVA over a frequency range of 15 Hz to 400 Hz or 400 ADC.

Its compact design (29 kg / 64 lbs) makes it easy to transport and ideal for on-site testing.

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 11 Power Systems

by Protec Tech Team April 07, 2015

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 10 IEC 61850 Installations

by Protec Tech Team April 07, 2015

The standard for “Communication Networks and Systems for Power Utility Automation”, IEC 61850, utilizes network technologies for all types of information exchange.

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 9 Switchgear and Circuit Breakers

by Protec Tech Team April 03, 2015

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 8 GIS Systems

by Protec Tech Team April 02, 2015

Gas-insulated switchgears (GIS) are compact and are used in applications where space is limited. For commissioning of GIS a high-voltage (HV) withstand test is required in accordance with standards (IEC 62271-203).

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 7 Rotating Machines

by Protec Tech Team April 02, 2015

READ MORE >>

Omicron CPC 100 All-In-One Test System – Part 6 Grounding Systems

by Protec Tech Team March 30, 2015

 

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider