Protec Equipment Resources
   Contact Us: 866.352.5550

Recently Published Blogs

Rent the Fluke 1750 to Analyze, Diagnose, Keep Equipment Operational

by Protec Tech Team May 16, 2017

To fully analyze, diagnose issues and keep equipment operational, power quality surveys are necessary.


Protec Rents Fluke Multimeters with Features to Fit Your Specific Need

by Protec Tech Team February 20, 2017

A standard diagnostic tool in the electrical industry, a digital multimeter is used to measure two or more electrical values, mainly voltage (volts), current (amps) and resistance (ohms).


Fluke 810 Vibration Tester a Trusted Inspection Tool You Can Rent Today

by Protec Tech Team January 10, 2017

Troubleshoot problem equipment and understand the root cause of failure with the Fluke 810 Vibration Tester.

Contact Us Now

The 810 can be utilized prior to planned maintenance to provide measureable proof of equipment condition, and help to anticipate equipment failures before they happen.


Rent the Fluke 1625-2, Perform Four Types of Earth Ground Measurement

by Protec Tech Team November 22, 2016

The Fluke 1625-2 GEO Earth Ground Tester can perform all four types of earth ground measurement:

  • 3-and 4-pole Fall-of-Potential (using stakes)
  • 4-pole soil resistivity testing (using stakes)
  • Selective testing (using 1 clamp and stakes)
  • Stakeless testing (using 2 clamps only)Contact Us Now

The Fluke 1625-2 offer such as advanced features as:


The Benefits of Renting Fluke Electrical Test Equipment

by Protec Tech Team November 16, 2016


Now Rent the Fluke 754 Documenting Process Calibrator from Protec

by Protec Tech Team November 09, 2016

A multi-functional documenting calibrator, the Fluke 754 Documenting Process Calibrator (DPC) can be used for more than just calibrating instruments, it also can be utilized to troubleshoot problems or to run routine maintenance.

Contact Us Now

The Fluke 754 Documenting Process Calibrator allows for the downloading of procedures, lists, and instructions created with software, or the uploading of data for printing, archiving, and analysis.


Rent the Fluke 750P27 300 PSI Pressure Module for Exact Measurement

by Protec Tech Team November 03, 2016

The Fluke 750P27 300 PSI Pressure Module allows gage, differential and absolute pressure measurement with the Fluke 754 and 744 Documenting Process Calibrators (DPC) and 725 Multifunction Process Calibrator (MPC) to measure pressure. 


For Advanced Motor and Drive Troubleshooting Rent the Fluke 1587/MDT FC

by Protec Tech Team September 26, 2016

With the Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit perform insulation tests, plus a wide-range of DMM tasks with confidence and ease. The kit also allows for the accurate measurement of AC current without breaking the circuit and checking the rotation of three-phase motors easily and safely.

Contact Us Now


Detect Power Quality Issues with the Fluke 1735

by Protec Tech Team September 07, 2016

External events, such as lightning strikes can impact power quality but other causes such as the starting and stopping of heavy equipment, circuit overloads, or improper wiring can lead to issues


Rent the Fluke 190-204/S ScopeMeter for Waveform Analysis and More

by Protec Tech Team August 03, 2016

Oscilloscopes are essential tools when it is necessary to measure and view electrical waveforms, or relieve oscillations caused by regenerative feedback in electronic circuits.


Measure Electrical Parameters with the Fluke 789 ProcessMeter

by Protec Tech Team July 18, 2016

A handheld, battery-operated tool for measuring electrical parameters, supplying steady or ramping current to test process instruments, the Fluke 789 ProcessMeter provides a > 24 V loop power supply. It has all the features of a digital multimeter, plus current output capability.

As with the Fluke 787 ProcessMeter the 789 also features a DMM design to meet 1000 volt IEC 1010 CAT III standards. The 789 ProcessMeter provides a precision 1000 V, 440 mA True-rms digital multimeter, frequency measurement to 20 kHz, simultaneous mA and % of scale readout, and 20 mA dc current source / loop calibrator / simulator.


Rent the Fluke 1587/MDT FC Troubleshooting Kit from Protec Today

by Protec Tech Team June 21, 2016

The Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit includes a Fluke 1587 Insulation Multimeter FC 2-in-1 Insulation DMM, Fluke i400 Current Clamp, and a Fluke 9040 Phase Rotation Indicator.

The Fluke 1587 FC Insulation Multimeter features four diagnostic functions through the Fluke Connect Measurements application:


Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider