Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

Avoid Hazards of the Stator Core Ring Flux Test with ELCID Evolution

by Protec Tech Team October 18, 2017

Continuous thermo-mechanical stresses and thermal cycles can have a severe impact on a generators stator core, and over time, this can lead to deficiencies in the core insulation.

READ MORE >>

Rent Astro-Med TMX-18 for Long-Term Trending, High-Speed Event Detection

by Protec Tech Team April 13, 2016

Whether your test runs for 100 milliseconds or 100 hours, the Astro-Med TMX-18 High-Speed Data Acquisition System won’t miss a glitch. 
READ MORE >>

Keep Equipment Operating Safely with FLIR T440 and T640

by Protec Tech Team January 21, 2016

You need dependable troubleshooting tools that help find and report problems fast, and keep equipment running and reliable. That’s why Flir infrared cameras are essential. They let you see invisible heat caused by electrical resistance, mechanical wear, and other issues early enough to help you keep things operating safely and head off expensive downtime.

READ MORE >>

Measure the Condition of Stator Core Insulation with ELCID Evolution.

by Protec Tech Team December 07, 2015

Generators are exposed to extreme electrical, thermal and mechanical stresses over the course of use. Continuous thermo-mechanical stresses and thermal cycles can have a severe impact on the stator core, and over time, this can lead to deficiencies in the core insulation.

READ MORE >>

Protec Offers a Wide Range of Vanguard Test Equipment

by Protec Tech Team December 02, 2015

Whatever your electrical test and measurement needs might be, rely on the wide range of Vanguard test equipment offered by Protec.

Transformer Turns Ratio Testers


Vanguard TRI-PHASE True Three Phase TTR

 

 

 

READ MORE >>

Rent the Doble F6150 For Ground Fault or Microprocessor Relay Testing

by Protec Tech Team November 09, 2015

Protective relays are designed to be responsive to an abnormal current or power flow. They are used in combination with medium voltage circuit breaker (above 600 volts) to sense abnormalities and isolate disturbances, with minimum disruption to the electrical system, preventing damage to the equipment. 

READ MORE >>

For High Current Applications Rent the ETI PI-6000 From Protec

by Protec Tech Team November 02, 2015

The ETI PI-6000 Primary Circuit Breaker Test Set can be used on high current applications like ratio transformers, and heat runs, and will also test low-voltage, molded-case and metal-clad, direct acting AC circuit breakers from various manufactures.

READ MORE >>

FLIR T640 Infrared Camera Features the Imaging Capability You Need

by Protec Tech Team November 02, 2015

The professional-grade FLIR T640 Thermal Imaging Camera features all of the imaging capability you need, and the features you want when you’ve got a demanding workload.

READ MORE >>

Perform Testing of Power Semiconductors with the Larkin M3K

by Protec Tech Team October 23, 2015

The Larkin Power Components Power Semiconductor Tester - Model M3K is designed to perform testing of power semiconductors, such as, SCRs/Thyristors, Diodes, IGBTs, Transistors, and most MOS FETs.

READ MORE >>

Protec Offers the HDE MARK III Dual Range Voltmeters and Phasing Set

by Protec Tech Team October 22, 2015

Designed to measure AC and DC voltages on conductors from phase-to-ground and phase-to-phase, the HD Electric MARK III Dual Range Voltmeters and Phasing Set allows users to determine if two conductors are in-phase or out-of-phase with one another, and is designed for use on overhead lines and are adaptable for use on underground systems by using accessory probes.

The HD Electric MARK III Dual Range Voltmeters and Phasing Set is a digital voltmeter and phasing set that features universal splines for mounting onto hotsticks and large easy-to-read displays.

READ MORE >>

Doble M4000 M4100, Test Results You Trust, No Matter What the Environment

by Protec Tech Team October 20, 2015

Dependable, accurate test results are a must to make critical operating decisions about your power apparatus, and you need to have answers you trust, no matter what the test environment.

READ MORE >>

Protec Offers the PowerComm PCA-4125 Power Communications Analyzer

by Protec Tech Team October 14, 2015

The PowerComm PCA-4125 Power Communications Analyzer offers valuable and accurate measurement readings not available in other instrumentation. Waveform graphs and helpful conversions are displayed automatically, providing the user with data needed to quickly identify and resolve issues.

Save, recall, and download field test setups and test results with the PowerComm PCA-4125 Power Communications Analyzer, the first portable Selective Level Meter capable of internal data storage or external data output to a USB memory stick. Each test result is date/time stamped and can be transferred to a computer for report generation, helping users comply with NERC requirements.

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider