Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

Doble F6150 Family of Relay Test Systems are Packed Features

by Protec Tech Team January 27, 2016

Performing diagnostic tests on relays usually requires accurate test sets to ensure their safety. A false "pass" result can lead to serious problems in your electrical system. It is wise to rent a high quality test set to ensure reliable test results.

READ MORE >>

Doble Universal Controller (DUC) General and Environmental Specs

by Protec Tech Team January 06, 2016

The Doble Universal Controller provides the processing power necessary to run advanced software in the field. It is designed for durability and is built to withstand the same tough requirements of test equipment. Testing is even possible in full sunlight thanks to its bright, transreflective display.

Doble DUC General Specifications

Fully Rugged
Multi-layered magnesium chassis MIL-STD-810G and IP67 tested Hazardous Location Certified Piston Sealing, Rugged SSD Cartridge

READ MORE >>

Doble TDR9000 and TDR9100 Circuit Breaker Test Sets Offer Many Benefits

by Protec Tech Team December 07, 2015

circuit breaker test set can help you effectively test protective devices by measuring the timing and motion of the mechanism. It simulates electrical system conditions and determines if the circuit breaker will respond properly. If you are looking for a good tester, you might be interested in the Doble TDR9000 or the TDR9100 test sets. These testers provide accurate and efficient testing of dynamic timing and mechanism motion of circuit breakers. 

READ MORE >>

Determine Remaining Life Span of the Insulation with Doble M4000 M4100

by Protec Tech Team November 09, 2015

Power factor testing is one of the common diagnostic methods used to identify bad insulation. By measuring the dissipation factor of the cable  the remaining life span of the insulation can be determined

READ MORE >>

Rent the Doble F6150 For Ground Fault or Microprocessor Relay Testing

by Protec Tech Team November 09, 2015

Protective relays are designed to be responsive to an abnormal current or power flow. They are used in combination with medium voltage circuit breaker (above 600 volts) to sense abnormalities and isolate disturbances, with minimum disruption to the electrical system, preventing damage to the equipment. 

READ MORE >>

Doble M4000 M4100, Test Results You Trust, No Matter What the Environment

by Protec Tech Team October 20, 2015

Dependable, accurate test results are a must to make critical operating decisions about your power apparatus, and you need to have answers you trust, no matter what the test environment.

READ MORE >>

Rent the Doble TDR9100 for Complex Testing of Circuit Breakers

by Protec Tech Team October 12, 2015

The Doble TDR9100 Circuit Breaker Test System is an inclusive, rugged and field-portable instrument for simple and complex testing of circuit breakers.

Test all types of circuit breakers with efficient and accurate performance measurements, using the the Doble TDR9100 Circuit Breaker Test System.

READ MORE >>

Measure Electromagnetic Earth Fault Relays with the Doble F6150

by Protec Tech Team August 31, 2015

The Doble F6150 Relay Testing System can be used to measure the majority of relays.

And while it is capable of measuring high-burden electromagnetic earth fault relay, it is also sophisticated enough to complete advanced multi-functional numerical microprocessor protection schemes. It can do that without any additional devices, making the Doble F6150 Relay Testing System very popular for relay testing.

READ MORE >>

Doble Universal Controller (DUC) Now Available for Rent from Protec

by Protec Tech Team August 21, 2015

The Doble Universal Controller (DUC) is a rugged tablet computer powerful enough to operate Doble’s suite of high voltage test equipment and software solutions while being tough enough to withstand the rigors of electrical field testing.

The DUC provides the processing power necessary to run advanced software in the field. It is designed for durability and is built to withstand the same tough requirements of test equipment. Testing is even possible in full sunlight thanks to its bright, transreflective display.

READ MORE >>

When Conducting Electrical Inspections Trust Doble Test Equipment

by Protec Tech Team July 23, 2015

Doble Engineering is one of the most reliable manufacturers of testers available on the market. Doble has been manufacturing equipment for decades that's why they are known for their experience in producing top of the line equipment. Doble Equipment is reliable because it gives accurate readings and can generally withstand tough conditions. 

READ MORE >>

Doble M4100 Power Analysis is Smart, Automated Test Equipment

by Protec Tech Team July 22, 2015

The Doble M4100 Power Analysis, together with the DTA Expert System Software, represent the new generation of smart, automated test equipment used to determine the condition of high voltage substation apparatus.

The Doble M4100 Power Analysis eliminates interference problems

READ MORE >>

Analyze Common Problems in Transformers with the Doble M5400

by Protec Tech Team July 02, 2015

As transformers age their internal condition degrades, increasing the risk of failure. When a transformer is new it has sufficient electrical and mechanical strength to withstand unusual system conditions. As transformers age, their insulation strength can degrade to the point that they cannot withstand system events such as short-circuit faults or transient over-voltages.

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider