Protec Equipment Resources
   Contact Us: 866.352.5550
    
blog-header

Recently Published Blogs

Doble F6150, a Complete Solution for Problems Related to Protection Relays and Schemes

by Protec Tech Team May 05, 2014

Full simulation tests can be run on protection schemes and relays very efficiently with the help of a Doble F6150 Relay Testing System.

READ MORE >>

Keep Relays Working Properly With the Doble F6150 Relay Testing System

by Protec Tech Team January 27, 2014

Relays should be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices. Relay test sets are equipment used in testing relays by applying sufficient current to simulate specific conditions, assuring that the relay is operating correctly.

READ MORE >>

Assure Proper Working Condition of Protective Relays with the Doble F6150

by Protec Tech Team January 02, 2014

A protective relay is designed to calculate operating conditions on an electrical circuit and trip circuit breakers when a fault is detected. Relays should always be kept in proper working condition to ensure electrical safety and reduce possible damage to other devices.

READ MORE >>

Comprehensive Protection Scheme Testing with the Doble F6150

by Protec Tech Team December 18, 2013

Testing protection schemes requires special electrical test equipment offering high power, sophisticated software and flexibility. The Doble F6150 fits these specifications perfectly.  With a wide range of ground and earth relay faults along with microprocessor protection schemes, the Doble F6150 allows you to run comprehensive tests using just one test unit, alleviating the need to carry multiple tools in the field.

READ MORE >>

Test with the Doble F6150 to Verify Proper Operation of Relays

by Protec Tech Team November 13, 2013

Offering extremely versatile relay testing equipment used to test all manners of relays and protection schemes, Doble is a trusted name in the electrical diagnostic testing industry.

READ MORE >>

Relay Testing Made Easy with the Doble F6150

by Protec Tech Team November 03, 2013

Doble F6150 Relay Testing SystemRelay simulation tests that are tough to perform with the help of other devices can easily be done with the help of the Doble 6150. This is why many professionals carry the Doble 6150 whenever they go anywhere to test electrical units.

READ MORE >>

Test Ground Over-Current Relays Correctly with the Doble F6150

by Protec Tech Team October 22, 2013

Doble F6150 Relay Testing SystemDoble provides several options for expanding the F6150 so it can be configured to fit your needs exactly.

READ MORE >>

Doble F6150, the Ultimate Tool for Protection Scheme Testing

by Protec Tech Team October 08, 2013

The Doble F6150 is a versatile, all-in-one solution for testing protection relays and schemes. Designed to meet your needs, the Doble F6150  is capable of performing the most simple through the most complex tests. Whether you need to test an individual component or test an entire scheme, the Doble F6150 is the proven solution to assess protection system performance for analog testing of 1A and 5A protection devices.

READ MORE >>

Total Test Solution for Protection Schemes with the Doble F6150

by Protec Tech Team October 04, 2013

The Doble F6150 is the only instrument with the high power, flexibility, and sophisticated software to run full simulation tests on your relays and protection schemes. It provides everything you need in a single, field-rugged, portable box. The Doble F6150 can test everything from a single, high-burden electromechanical earth/ground fault relay to complete, modern, multi-function numerical microprocessor protection schemes, without the need for additional instruments. With the ability to perform steady-state, dynamic-state, and transient simulation tests., the Doble F6150 can even be used for end-to-end protection scheme tests using Global Positioning System technology to synchronize remotely located Doble F6150s.

READ MORE >>

Alleviate Uncertainties in Performance with the Doble F6150

by Protec Tech Team September 25, 2013

Traditional steady-state testing can only test each individual component of a system, not disclosing how the entire system behaves under true power-system conditions, leaving many uncertainties in performance.

READ MORE >>

True Power System Simulation With the Doble F6150

by Protec Tech Team September 19, 2013

To run full simulations on all types of relay schemes, microprocessor, electromechanical, or a mixture,  you need an instrument that can generate high test power and provide flexible configurations for many types of tests.

READ MORE >>

Doble F6150 – Optimal Solution for Protection Schemes

by Protec Tech Team May 08, 2013

Doble_F6150When it comes to running complete simulation tests on your protection schemes and relays, the Doble F6150 Relay Testing System is the one of the optimal solutions. 

It is a sophisticated, flexible, and high power tool which meets all your needs. This technologically innovative device comes in a portable and field-rugged box. It is capable of testing the following effectively:

READ MORE >>
Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider