Protec Equipment Resources
   Contact Us: 866.352.5550
   

Using the Doble M5200 SFRA for Testing Transformers Without Untanking

Posted by Protec Tech Team on

Doble M5200 Sweep Frequency Response AnalyzerTransformers will sometimes experience a lot of stresses related to the transformer being moved from one location to another, or when they experience the excessively high currents related to through fault conditions.

Contact Us Now

Physical changes to the inner workings of a transformer result in altered electrical characteristics. When abnormal conditions such as these occur, it is important to check for signs of physical change or deformation of transformer components. You can use a Sweep Frequency Response Analyzer  to verify that Physical changes have not occurred inside the transformer without having to remove it from its enclosure.

The Doble M5200 Sweep Frequency Response Analyzer is a Sweep Frequency Analyzer that lets you find internal problems in transformers without detanking. How is this possible? It sends out a wide band of frequency test signals. Then the RLC components of the transformer act as an electrical filter that have a specific response over a range of frequencies. These transformer output responses are then compared to the corresponding input source signals and plotted into a characteristic baseline signature for that transformer.  Subsequent measurements on that transformer can then be laid  on top of the original signature to confirm if responses remain the same or if changes have occurred.  Changes in mechanical and electrical characteristics of the transformer will cause a deviation from baseline data. The range of frequency in which changes occur can then potentially be used to relate changes to specific components of the transformer (core, winding, connections etc...).  

Related electrical test equipment available for rent from Protec:

Doble M5400 Sweep Frequency Response Analyzer

Doble M4000 M4100 Power Factor Insulation Analyzer

Vanguard LTCA-40 Load Tap Changer Analyzer

This electrical test equipment is available for rent, lease, or purchase from Protec Equipment Resources. We are here to help you with your testing equipment needs.

Wherever the job takes you (and the equipment), with Protec's multiple locations, we always ship from the office closest to your desired drop location (if the electrical test equipment you need is in-stock at that location), and the equipment can be returned to the nearest office.

We always consider ALL shipping options in order to save you the most time and money.

Also, if you happen to be close to one of our many office locations, walk-ins are always welcome!

Rely on the Electrical Test Equipment Rental Experts, we are there when and where you need us.

Visit Our Website

Editor’s Note: This post was originally published April, 2012 and has been updated freshness, accuracy and comprehensiveness.

Topics: Doble, Transformer

Recent Entries

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider