Protec Equipment Resources
   Contact Us: 866.352.5550
    

Reliable Power Quality Analyzers​ from Fluke

Posted by Protec Tech Team on

Distortion, harmonics and other voltage variations are generated in the power line due to non-linear loads. Ballasts, rectifiers and switched-mode power supplies are the common culprits that cause degradation of power quality. 

For excellent power quality analysis, rely on power quality analyzers from Fluke.

Fluke 1735 Three-Phase Power LoggerFluke 1735 Three-Phase Power Logger

This tester is the ideal device for conducting basic power quality logging and energy studies. It also offers easy setup which helps save you time and effort.

Fluke 1735 Three-Phase Power Logger features:

• Can record power parameters up to 45 days

• Allows you to monitor user-defined averaging periods and maximum power demand

• Lets you prove the benefit of improving the efficiency of electrical line by conducting energy consumption tests

• Can measure all three phases

• Included software lets you view and generate reports

• Compact and durable design

• Ingress Protection 65 and 60 Volts CAT III rating

• Captures voltage swells and dips from load switching

• Allows load studies, energy assessments, harmonics and voltage event capture

• VGA color transmissive display with a 320 x 240 pixel resolution

• Powered by rechargeable NiMH battery-pack

• 10.24 kHz sampling rate

• 4MB flash memory

 

Fluke 1750 Power Quality Analyzer

Fluke 1750 Power Quality Analyzer

The Fluke 1750 Power Quality Analyzer offers unprecedented resolution and accuracy when capturing power events in the electrical line. This device provides excellent visibility into your electrical distribution center.

Fluke 1750 Power Quality Analyzer features:

• Threshold-free setup 

• Has a cross-channel and current triggering system that lets you capture every parameter

• Includes an intuitive software for excellent analysis of results and generating reports

• Plug and play, easily set up the device in minutes

•  Internal switching of test leads

• 5 MHz 8000 Vpk waveform capture

• Allows easy transfer of data through an SD card or through its 100BaseT Ethernet connection

• Wireless control through a PDA connection

• Simultaneous sampling of every channel 

• 600 V CAT IV and 1000 V CAT III safety rating

• Accurate real-time clock

• 1 GB internal memory

• 4 Voltage and 5 Current channels

• 2MΩ input resistance and <20pF input capacitance

• Digital PLL synchronized sampling

• 42.5 to 69 Hertz PLL lock range

• 24 bits A/D resolution for voltage and current

• 14 bits A/D resolution for voltage transients

• Can measure AC/DC voltage up to 1000 V rms

Protec offers multiple locations to better serve your needs, and electrical testing equipment rental options that work for you.

Visit Our Website

Recent Entries

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider