Protec Equipment Resources
   Contact Us: 866.352.5550
    

Keep CTs in Good Working Condition with Vanguard EZCT Test Sets

Posted by Protec Tech Team on

Current transformers are often used to convert high currents to a lower one which is safe enough for measuring instruments or protective devices to use. It is also used in monitoring the power facility during operation. It is important to keep them in good working condition because this can cause inaccurate measurements or sometimes damage the electrical facility.

Vanguard_EZCT-2000aThe Vanguard EZCT-2000A Automated CT Test Set can perform the current transformer (CT) excitation test, measure the CT winding resistance and CT current-ratio automatically.

All of the EZCT-2000A’s test leads can be connected to the CT output terminals (X1, X2, X3, X4 and X5), eliminating the need for lead switching during testing. Test voltage output is automatically raised and lowered by the EZCT-2000A without any operator intervention.

With up to 2000 Vac excitation test voltage available, the EZCT-2000A can easily perform excitation tests on very large CT’s.

 

Vanguard_EZCT-2000b

Designed specifically for CT testing, the Vanguard EZCT-2000B Automated CT Test Set has the following outstanding features that can greatly increase productivity and save time during the commissioning stage.

The EZCT-2000B performs CT excitation, current-ratio, polarity, and phase angle tests Measures insulation resistance and winding resistance of the CT secondary windings, and measures the CT’s load burden

The EZCT-2000B’s test leads can be connected to all the CT output terminals, and the complete CT test can be performed automatically without any operator intervention.

 

Vanguard_EZCT-2000c

Designed specifically for CT testing, the EZCT-2000C Plus has the following outstanding features that can greatly increase productivity and save time during the commissioning stage:

 The Vanguard EZCT-2000C Plus Automated CT Test Set  performs CT excitation, current-ratio, polarity, phase angle tests, measures insulation resistance, winding resistance of the CT secondary windings, measures the CT’s load burden and can be used as standalone or computer-controlled via USB or Bluetooth wireless interface.

The EZCT-2000C Plus’ test leads can be connected to all the CT output terminals, and the complete CT test can be performed automatically without any operator intervention.

Available for rent, lease, or purchase from Protec Equipment Resources.  We are here to help you with your testing equipment needs.

Get a Quote Today

 

Topics: Vanguard, Rent Electrical Test Equipment, Current Transformer

Recent Entries

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider