Protec Equipment Resources
   Contact Us: 866.352.5550
    

For Accurate Low Resistance Measurement Rent the Megger DLRO10HD

Posted by Protec Tech Team on

Megger DLRO10HD 10A Digital Low Resistance OhmmeterLow resistance measurement is used to determine the condition of joined junctions like circuit breaker and relay contacts and terminals. When these joints weaken, carbon deposits, grease, dirt and other contaminants resulting in the resistance to increase, which in turn causes the junction to not efficiently carry the current, dissipating the power losses as heat. Thus, leading to further deterioration and eventual failure.

When it necessary to test resistance, the Megger DLRO10HD 10A Digital Low Resistance Ohmmeter provides enhanced compliance, and is capable of delivering 10 A into measurements up to 250 mΩ and 1 A into measurements up to 2.5 Ω. The duration of each test may be up to 60 seconds.

The Megger DLRO10HD 10A Digital Low Resistance Ohmmeter offers simple operation and is designed for stable ground and bench operation.

Powered from either its rechargeable battery or line power, The DLRO10HD, is suitable for continuous testing in production line/repetitive use environments.

Megger DLRO10HD Test Modes

Mode

Description

Automatic

Applies current in one direction only to speed up the measurement process.  Test starts automatically when probes are connected.

Continuous

Allows repeated measurements to be made on the same sample. Simply connect the test leads and press the test button. The measurement is updated every three seconds until the circuit is broken.

Inductive

When measuring resistance on motors or generators, selected current passes through the sample continuously in one direction only and take repetitive readings that will gradually decrease to the true value as the voltage stabilizes.

Related electrical test equipment available for rent from Protec:

AEMC 6250 10A Micro-Ohmmeter

Megger DLRO200-115 200A Digital Low Resistance Ohmmeter

Raytech Micro Junior 10A Precision Micro Ohm Meter

Vanguard Auto-Ohm 200 S3 200A Micro-Ohmmeter

This electrical test equipment is available for rent, lease, or purchase from Protec Equipment Resources. We are here to help you with your testing equipment needs.

Protec's Calibration Lab offers accurate and affordable calibration services for all makes and models of electrical test and measurement equipment. Contact us today for a quote.

 

Get a Quote Today

Topics: Megger, DLRO, Low Resistance Ohmmeter

Recent Entries

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider