Protec Equipment Resources
   Contact Us: 866.352.5550
    

Doble F6150SV Relay Testing System General Specifications

Posted by Protec Tech Team on

Doble_F6150svDesigned to meet your needs, the Doble F6150SV Relay Testing System is capable of performing the most simple through the most complex tests. Whether you need to test an individual component or test an entire scheme, the Doble F6150SV Relay Testing System is the proven solution to assess protection system performance for analog testing of 1A and 5A protection devices.

 

Doble F6150SV Relay Testing System General Specifications:

Enclosure:

 

High-impact, molded, flame-retardant ABS meets National Safe Transit Association testing specification No.1A for immunity to severe shock and vibration

Dimensions:

15 X 9.5 X 18 inches, 38 X 24 X 45.7 cm

Weight:

42lb,19.05kg (front cover and strap included)

Environmental:

IEC 60068-2-2 Dry Heat (+85°C storage; + 50°C Rating Operating)

IEC 60068-2-1 Cold (-50°C storage; 0°C operating)

IEC 60068-2-30 Damp Heat (+55°C, 6 cycles, 95% humidity) NEMA Enclose Rating Type 1IEC Enclosure IP20

Electrostatic Discharge Immunity:

IEC 801-2 I.E.C. performance level

1 @ 10kV: normal performance within specifications

I.E.C. performance level

2 @ 20kV: no permanent damage.

IEC61850 GOOSE:

Certified by KEMA as being compliant with IEC61850 protocol (IEC61850-7-2 and 8-1)

Mechanical:

IEC 60068-2-27 Shock (15g/11ms, half sine)

IEC 60068-2-6 Vibration (10-150 Hz, 20m/s2)

IEC 60068-2-6 Drop Test

EMC Emissions:

FCC 47 CFR Part 15 Class A (USA)

EN55011:1998/A1:1999/

A2:2002 Group 1 Class A ISM (EU)

AS/NZS CISPR 11:2004

Class A ISM (Australia)

ICES-001 Issue 3 ISM (Canada)

Surge Withstand Capability:

ANSI/IEEE c37.90. The simulator functions as a source during surge withstand capability tests, when the ANSI/IEEE specified isolating circuit is interposed between the simulator and the test relay.

IEC61850 Sample Values (Publishing):

80 samples per cycles for nominal frequencies 50Hz and 60Hz using GPS time synchronized signals

EMC Immunity:

EN 61000-6-2:2005;

IEC 61000-4-2/3/4/5/6/11

Line Power Supply:

105-264V, 47-63 Hz

Communication Interfaces (Ethernet, Wi-Fi, USB)

Ethernet or USB control to PC,

Wi-Fi (802.11 B+G bands, 30 - 80ft, 9 - 24m)

Station bus Ethernet interface: two redundant RJ45s at 100MBps

Process bus Ethernet interface: one redundant RJ45 at 1GBPS and MTRJ (optical fiber) at 100 BaseFX

Quality Assurance Management System:

Third Party certification to ISO 9001:2000

Safety:

EN 61010-1; UL 61010-1; CSA 27.2 # 61010-1

Calibration:

Certification traceable to N.I.S.T. standards

Humidity:

Up to 95% relative humidity, non-condensing

Available for rent, lease, or purchase from Protec Equipment Resources.  We are here to help you with your testing equipment needs.

Rent Electrical Test & Measurement Equipment Today

Topics: Electrical Test and Measurement Equipment, Doble

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider