With regular checks of the insulation condition it is possible to avoid consequential damage, such as core burning or damage of the bar insulation.
The flux test is used to measure the condition of the stator core insulation and to detect possible local insulation damage. Insulation failure can result in local hot spots between several sheets of the core during magnetization.
The IRIS Power Electromagnetic Core Imperfection Detection Test Set - EL CID Evolution operates at only 4% of normal operating flux, generated by its quickly installed excitation kit.
Any imperfections in the core inter-laminar insulation produce fault currents which are detected by a Chattock coil and analyzed by the ELCID Evolution signal processing unit. Measurement results are digitally stored in the PC for analysis and report generation, and faults can be precisely located in the core. Future results can be compared to past results for trend analysis.
Reduce test outage time and avoid the hazards of the stator core Ring Flux test with the ELCID Evolution.
EL CID Evolution Features:
- Faster test scanning (up to 120mm/sec @60Hz)
- Easier excitation calculations
- Simpler testing with dual Chattocks
- User-friendly LCD display to guide user operation
- Ability to combine step-iron data with main core traces
- "Hot spots" color map display
- Fully compatible with existing data
With offices located in Dallas, Houston, Chicago, Atlanta, Reno, and New Jersey, each maintaining a full stock of electrical test and measurement equipment, Protec can better serve your needs. Offering equipment from ABB, Doble, Dranetz, Eaton Cutler Hammer, ETI, Fluke, High Voltage, HV Diagnostics, Megger, Raytech, Square D by Schneider, Vanguard and other premium manufacturers, Protec provides for rent, lease or purchase, all the electrical testing equipment you need to get the job done.