Protec Equipment Resources
   Contact Us: 866.352.5550
    

Accurate and Easy Power Quality Analysis with Fluke Power Quality Recorders

Posted by Protec Tech Team on

Fluke 1750 Three Phase Power RecorderPower quality issues can cause serious problems in an electrical facility. Poor power quality can cause problems like loss of sync of motors, erratic operation of sensitive electronic equipment, electromagnetic interference and increased power draw from the electrical mains.

Distortion, harmonics and other voltage variations are generated in the power line due to non-linear loads. Ballasts, rectifiers and switched-mode power supplies are the common culprits that cause degradation of power quality. To help correct power quality issues, engineers use a compensation network to suppress power line distortion.

The amount and type of distortion present in the electrical line helps determine the proper amount of compensation needed to counteract the problem. To determine the amount and type of distortion present in the power line, a technician uses a power quality analyzer. This device helps sort out the harmonics, power parameters, voltage events and distortion. 

For excellent power quality analysis, you might want  to check out power quality analyzers from Fluke. Some of the popular models you might be interested in are the Fluke 1735 and 1750 Power Loggers. Read on for a comparison of the two models.

Fluke 1735 Three-Phase Power Quality Logger

This tester is the ideal device for conducting basic power quality logging and energy studies. It also offers easy setup which helps save you time and effort.

Product Features

  •        Can record power parameters up to 45 days
  •        Allows you to monitor user-defined averaging periods and maximum power demand
  •        Lets you prove the benefit of improving the efficiency of electrical line by conducting energy consumption tests
  •        Can measure all three phases
  •        Includes software lets you view and generate reports
  •        Compact and durable design
  •        Ingress Protection 65 and 60 Volts CAT III rating
  •        Captures voltage swells and dips from load switching
  •        Allows load studies, energy assessments, harmonics and voltage event capture
  •        VGA color transmissive display with a 320 x 240 pixel resolution
  •        powered by rechargeable NiMH battery-pack
  •        10.24 kHz sampling rate
  •        4MB flash memory

Fluke 1750 Three Phase Power Recorder

The 1750 offers unprecedented resolution and accuracy when capturing power events in the electrical line. This device provides excellent visibility into your electrical distribution center. This device guarantees capturing all power quality parameters. You also have the option to use a PDA to give you a wireless front panel interface. This feature makes it suitable for conducting tests in awkward test locations.

Product Features

  •        Threshold-free setup 
  •        Has a cross-channel and current triggering system that lets you capture every parameter
  •        Includes an intuitive software for excellent analysis of results and generating reports
  •        Plug and play, easily set up the device in minutes
  •        Internal switching of test leads
  •        5 MHz 8000 Vpk waveform capture
  •        Allows easy transfer of data through an SD card or through its 100BaseT Ethernet connection
  •        Wireless control through a PDA connection
  •        Simultaneous sampling of every channel 
  •        600 V CAT IV and 1000 V CAT III safety rating
  •        Accurate real-time clock
  •        1 GB internal memory
  •        4 Voltage and 5 Current channels
  •        2MΩ input resistance and <20pF input capacitance
  •        Digital PLL synchronized sampling
  •        42.5 to 69 Hertz PLL lock range
  •        24 bits A/D resolution for voltage and current
  •        14 bits A/D resolution for voltage transients
  •        Can measure AC/DC voltage up to 1000 V rms
  •        Has a crest factor of 3 or less
  •        Has a crest factor of 4 or less

If you only need basic power quality analysis, the 1735 is the ideal choice. This tester is ideal for most commercial and industrial applications. If you need a more advanced power quality analyzer, the 1750 is the best choice. Packed with features that can make power quality analysis fast and easy on large electrical facilities.

Protec Equipment Resources is a trusted source of electrical test equipment. We offer rentals, leasing and equipment sales to cater to your needs. Feel free to call us at 1-866-352-5550 for more details.

Visit Our Website

Topics: Fluke, Rent Electrical Test Equipment, Power Quality

Recent Entries

Bolt-Rule-b.jpg

Protec Equipment Resources Inc.
National Headquarters
1517 West Carrier Pkwy
Suite 116
Grand Prairie, Texas 75050

Phone: 972.352.5550
Fax: 972.352.5553

Become a Protec Insider